Philips DVDR75 TV Channel Programming, Press System MENU. The Installation menu will reappear

26 TV Channel Programming

Although the DVD Recorder selects available TV channels during Initial Setup, you may want to repeat the process later if more channels become available in your area.This will erase and replace all previously stored chan- nels.To update the available channels, follow these steps.

Press SYSTEM MENU. Press ; to select			in the top left
1 corner of the menu bar at the top of the TV screen.
Press CH-9repeatedly to select in the next menu, then
2 press : to enter the Installation menu.
	Installation
	K
	u B Auto Ch. Programming	B

LAdd/Delete Channels VCR Plus+ Ch. Time/Date Cable/Antenna

To exit press

SYSTEM MENU

3 Auto Ch. Programming will be selected. Press OK. “Searching for TV channels” will appear, along with a scale showing channels that are being memorized.The number of channels found will show on the screen as the searching progresses.This will take a few minutes, depending on the number of channels available.

4 When the channel search finishes, “Auto ch. search com- plete” will appear, along with the total number of channels found.

Press SYSTEM MENU. The Installation menu will reappear.

If you are satisfied with the channels found, press SYSTEM MENU repeatedly to remove the menu. You are finished.

To add or delete additional channels, press CH-9to select

Add/Delete Channels, then go to step 5.

Installation

KAuto Ch. Programming

u B Add/Delete Channels	B
L VCR Plus+ Ch.
Time/Date
Cable/Antenna

To exit press

SYSTEM MENU

5 Press :. A channel list will appear. Beside each channel number, you will see “Delete” or “Add.”

6 Press CH+8 or CH-9to select the channel you want to add or delete, then press ; or : to choose Add or Delete for that channel. Press OK to store your choice. “Stored” will appear briefly in the lower left corner of the menu.

Repeat step 6 as often as necessary to add or delete all the channels you want.

7 Press SYSTEM MENU repeatedly to remove all the menus when you are finished.

STANDBY

MONITOR

TV / DVD T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7	8	9	1,4,7
	MENU
DISC	0	SYSTEM
SELECT		OK	1-6
	CH
	CH
TIMER
FSS		TV VOLUME

RETURN CLEAR

PLAY

Helpful Hints

•Access added channels by pressing CH+8 or CH-9. Deleted channels will be skipped. Delete channels you rarely watch.You still can select deleted channels with the Number buttons.

•If new channels become avail- able, or if you receive a chan- nel the Recorder did not set, add the channel.

•The Recorder detects whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels,

reset your channels. Follow steps 1-2 above. Press CH-9 to choose Cable/Antenna, then press OK. Press B or s to choose Cable, Anten. (antenna), or Auto (for the Recorder to detect automatically). Press OK. “Stored” will appear briefly in the lower left corner of the menu. Press SYSTEM MENU. Press OK again to reset the channels. When the search ends, press SYSTEM MENU repeatedly to clear the screen.