Philips DVDR75 Hookups, Determining the best possible connection, Before you begin, Remember

Hookups 9

Determining the best possible connection...

Your existing equipment, especially your TV, will determine your connection.These guidelines describe which options provide the best picture and sound quality.

★★★★Component Video provides the best picture quality. Progressive Scan Component Video has the highest quality, but use it only if the TV has Progressive Scan. See pages 12 and 60.

★★★S-Video provides excellent picture quality. See page 13.

★★Composite Video (a yellow Video jack) provides good picture quality. See page 14.

★★Your TV may have only an RF-style jack, usually labeled Antenna In or 75 ohm. You can use an RF coaxial cable for a simple connection. See page 10.

★★★★Digital audio connections provide the clearest sound. Connect the Recorder’s Coaxial DIGITAL AUDIO OUT jack to your Stereo for the best sound quality. See page 16.

★★★For the most common audio connection, connect the Recorder’s white/red OUT AUDIO L/R (left/right) jacks to the Audio In jacks of your Stereo or TV. See pages 12-15.

Before you begin...

●Refer to the manuals of your TV, Stereo, Cable Box, or other equipment as necessary. Note the jacks and connectors on the other equipment. Determine how to choose different Audio and Video In channels on your other equipment so you can see and hear the DVD Recorder on the TV, Stereo, etc.

●Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.

Remember...

●Set the TV to the correct Video In channel or channel 3.

This is channel 3 if you connect the Recorder directly to a TV only as shown on page 10.

Otherwise,Video In channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.These channels often are near TV channel zero (0). Or, your TV remote con- trol may have a button or switch that lets you choose the Video In channel directly. See your TV manual for details. Or, go to your lowest TV channel and change channels down until you see the blue Philips DVD background picture on the TV screen.

●Connect the Recorder directly to the TV. For example, do not connect the Recorder to a VCR, then connect the VCR to a TV. This may distort the pic- ture and sound. Your VCR may have the copy protection system, which could distort the DVD image.

●Set the Stereo to the correct channel or “source” mode.

●Do not connect the Recorder’s AUDIO OUT jacks to the PHONO IN jack of your Stereo.

●You only need one audio connection and one video connection between the Recorder and your TV (or TV and Stereo).You will not use all the jacks on the Recorder.

●You can use the DVD Recorder to preserve your memories by copy- ing a videotape to a DVD+R or DVD+RW. Special connections are needed between the DVD Recorder and your camcorder or VCR, which will play the existing videotape into the DVD Recorder for recording. See page 17 for details.

Once you determine the option that best fits with your existing equipment, find your choice on pages 10-16. Follow the steps for the hookup you chose.

When you finish your connections and turn on the Recorder for the first time, complete the Initial Setup.This sets up TV channels, menu languages, and other features. Go to page 18 to do the Initial Setup.