Philips DVDR75 owner manual Digital Output, Digital output will be selected. Press

After connecting the Recorder to your TV and other equipment, you may need to change the Recorder’s Digital Output setting. Look to see which Recorder audio jacks you connected to your other equipment, then set Digital Output accordingly.The information in step 4 will help you decide. Adjust Digital Output only if you used the Recorder’s Coaxial DIGITAL AUDIO OUT jack. (If you used the white/red OUT AUDIO L/R jacks, set Digital Output to Off. See page 62 to adjust the sound at Analog Output.)

1 Press SYSTEM MENU. Press ; to select in the top left corner of the menu bar at the top of the TV screen.

2 Press CH-9repeatedly to select G, then press :.

3 Digital output will be selected. Press :.

4 Press CH+8 or CH-9to select Off, PCM only, or All, then press OK.

●Select All if you connected the Recorder’s Coaxial DIGITAL AUDIO OUT jack to a Stereo that has a built-in multi-channel decoder. See page 16.

●Select Off if you did not use the Coaxial DIGITAL AUDIO OUT jack.

●Select PCM only if you used the Recorder’s Coaxial DIGITAL AUDIO OUT jack for connections, but your Stereo does not include a built-in digital multi-channel decoder. PCM represents Pulse Code Modulation.

	W	X	Y	Z	a
~	1	2	1en	off no	off
					Sound
G	Digital output			s Off
	Analog output			PCM only	K
r	Night mode			All	L

5 Press SYSTEM MENU to remove the menus.

Digital Output 61

STANDBY

MONITOR

TV / DVD T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7 8 9 1,5

DISC0 SYSTEM

	MENU
SELECT	OK

CH1-4

CH

TIMER

FSS	TV VOLUME
RETURN	CLEAR
PLAY
STOP
I	I

AUDIOPAUSE

REC/OTR