Philips DVDR75 VCR Plus+ Channels, Menu screen, then press to enter the Installation menu

If you intend to use the VCR Plus+ programming system, program the DVD Recorder with your local channel information.This will only take a few min- utes. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must set up channels in order for the system to work efficiently.

Before you begin, make sure you have 1) a cable TV channel list, if applicable (you can request one from your cable TV company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

Press SYSTEM MENU. Press ; to select		in the top left
1 corner of the menu bar at the top of the TV screen.
Press CH-9repeatedly to select	at the end of the next

2 menu screen, then press : to enter the Installation menu.

3 Press CH+8 or CH-9to select VCR Plus+ Ch. (channel), then press :.

Installation

Auto Ch. Programming

KAdd/Delete Channels

u B VCR Plus+ Ch.	B
L Time/Date
Cable/Antenna

To exit press

SYSTEM MENU

4 Press CH+8 or CH-9to select a VCR Plus+ Ch. number, then press the Number buttons or ; or : to enter the cor- responding Channel number from your TV guide list. If you use the Number buttons, enter the channel number as a three-digit number. For example, for channel 18, press 0,1,8.

Refer to the list from your local newspaper or TV guide for the VCR Plus+ channels and corresponding TV channel numbers for your area.These are the numbers you will enter as the Channel number as you complete the chart on the screen.

Installation

VCR Plus+ ch.

VCR Plus+ ch. Channel

K K...

u 001	s 018	B
L 002	-- -- --
003	-- -- --
004	-- -- --
005	-- -- --
L...	To store
	Press OK

VCR Plus+ Channels 27

STANDBY

MONITOR
TV / DVD	T / C PLAY MODE REC. MODE

1	2	3	4
4	5	6
7	8	9	1,6
	MENU
DISC	0	SYSTEM
SELECT		OK	1-5
	CH
	CH
TIMER
FSS		TV VOLUME
	RETURN CLEAR
	PLAY
	STOP
I		I

AUDIOPAUSE

REC/OTR

5 Press OK to store the Channel number. “Stored” will appear briefly in the lower left corner of the menu. Repeat steps 4-5 as often as necessary to complete the chart.

6 When you are finished, press SYSTEM MENU repeatedly to remove all the menus.

Helpful Hint

• Only memorized channels will appear if you use B and s to enter channel numbers at step 4. Use the Number buttons to enter any channel number.