Getting Started

If the progressive function is activated but your TV does not support progressive scan or the cables are not connected accordingly, the TV screen will be blank. You can deactivate progressive scan as below.

1Press STANDBY ON B on the front panel to switch on the DVD player.

2Press OPEN/CLOSE / on the front panel to open the disc tray.

3Press numerical key pad ‘1’ on the remote control.

The blue Philips DVD background appears on the TV screen.

Selecting the color system that corresponds to your TV

This DVD Player is compatible with both NTSC and PAL. In order for a DVD to play on this Player, the color system of the Disc, the TV and the DVD Player should match.

- - VIDEO SETUP PAGE - -

TV STANDARD

 

MULTI

TV DISPLAY

 

NTSC

CLOSED CAPTIONS

 

PAL

VIDEO OUTPUT

 

 

PROGRESSIVE

 

 

SMART PICTURE

 

 

 

 

MAIN PAGE

1Press SYSTEM MENU.

2Press 4 3 to select ‘Video Setup Page’.

3Enter its submenu by pressing OK.

4Use the 1 2 3 4 keys on the Remote Control to navigate in the menu.

Move to ‘TV Standard’ and press B.

PAL – Select this if the connected TV has the PALcolor system. It will change the video signal of an NTSC disc and output it in PAL format.

NTSC – Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc (VCD only) and output it in NTSC format.

Multi – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

Helpful Hints:

Before changing the current TV Standard setting, determine the color system of your TV.

If there is no proper picture appears on your TV, wait for 15 seconds for auto recovery.

- - REFER TO THE OWNER'S MANUAL - -

Changing MULTI to PAL

1.Ensure your TV supports PAL

2.If there is a blank screen on normal TV wait 15 seconds for auto recover

 

OK

 

CANCEL

1 2 - Move

OK - Select

- - REFER TO THE OWNER'S MANUAL - -

Confirm again to use PAL

If picture is good, press OK button on remote control

OK

 

CANCEL

TO GO BACK TO MULTI

1.Open tray,

2.Press '3' Key

.

1 2 - Move

OK - Select

To exit from the menu

Press SYSTEM MENU.

E n g l i s h

17

Page 17
Image 17
Philips DVP642/37 user manual Selecting the color system that corresponds to your TV, Press System Menu