Installation
IrDA Infrared Module Connector: FIR
This connector allows you to connect an IrDA Infrared module. You must configure the setting through the BIOS setup to activate the IR function.
Pin | Signal | FIR | |
1 | VCC | ||
1 | |||
2 | IRRX2 | ||
| |||
3 | IRRX | 5 | |
4 | GND | ||
| |||
5 | IRTX |
|
CLE266 |
Consumer Infrared Module / PS2 Header: KBMS
When the header is not in use, please short pin 3&5, pin 4&6, pin 7&9, and pin 8&10.
Pin | Signal | Pin | Signal | |
1 | +5V | 2 | GND | |
3 | KB_CLK | 4 | KB_DATA | |
5 | EXT_KBCLK | 6 | EXT_KBDATA | |
7 | MS_CLK | 8 | MS_DATA | |
9 | EXT_MSCLK | 10 | EXT_MSDATA | |
|
| CIR / EXT. KBMS | ||
|
|
| 10 | 9 |
CLE266 |
2 
1
