Philips EPIA-MII user manual Power Management Timer, Video Off Option, Power Off by Pwrbtn

BIOS Setup

Power Management Timer

Set the idle time before system enters power saving mode. ACPI OS such as Windows XP will override this option. Settings: Disabled and 1/2/4/6/8/10/20/ 30/40 (minutes) and 1 (hour)

Video Off Option

Select whether or not to turn off the screen when system enters power saving mode, ACPI OS such as Windows XP will override this option. Settings are:

Always On	The screen is always on even when system
	enters power saving mode.
Suspend -> Off	The screen is turned off when system enters
	power saving mode.

Power Off by PWRBTN

This field configures the power button function. Settings are:

Delay 4 Sec The system is turned off if power button is pressed for more than four seconds.

Instant-OffThe power button functions as a normal power-on/- off buttton.

Run VGABIOS if S3 Resume

Select whether to run VGA BIOS if resumed from S3 state. This is only necessary for older VGA drivers, select Auto if in doubt. Settings: Auto, Yes and No

AC Loss Auto restart

The field defines how the system will act after an AC power loss during system operation. Off will keep the system in an off stat until the power button is pressed. When set to On the system will restart when the power is back. Former-Stswill restore the system to its previous state. Settings: Off, On,

Former-Sts

3-19