With a PC

2 Connecting to a PC

Setup

≥Connect this unit to the PC after the software applications are installed.

≥Remove the supplied CD-ROM from your PC.

AUSB cable (supplied)

1 Connect this unit to the AC adaptor.

≥It is possible to use it connected to the PC with the batteries only.

2 Turn on the unit.

≥This function is available in all modes.

3 Connect this unit to a PC.

The USB function selection screen will appear.

≥Insert the USB connectors as far as they will go.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

4 Touch [PC].

≥When the unit is connected to a PC its power cannot be turned off.

Disconnect the USB cable, before turning this unit off.

≥Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen.

≥

Do not disconnect the USB cable or the AC adaptor while the access lamp is on or Built-in memory access icon ( ) appears on the unit screen.

≥

Do not disconnect the USB cable or the AC adaptor while the HDD access lamp is on or HDD access icon () appears on the unit screen.

≥This unit is automatically recognised as an external drive of the PC. (l 121)

119

VQT2B30