Function

Effect/Setting method

 

 

 

 

 

Self-timer

This is for recording still pictures using the timer.

 

 

 

 

 

 

 

 

 

≥ Change the mode to

.

 

 

 

 

 

 

 

 

Select the menu. (l27)

[PICTURE] # [SELF TIMER] # [10 SECONDS] or [2 SECONDS]

[10 SECONDS]: Records after 10 seconds [2 SECONDS]:

Records after 2 seconds

≥When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the recording lamp flashes for the time which has been set.

≥After recording, the self-timer is cancelled.

≥In auto focus mode, if the button is pressed halfway once and then fully, the lens focuses on the subject when the button is pressed halfway.

≥If the button is pressed fully all at once, the lens focuses on the subject just before recording.

 

 

To stop the timer midway through

 

 

Press the MENU button.

 

 

 

 

Built-in flash

 

When the

button is pressed, the flash is activated and the

 

 

picture will be recorded. Use the built-in flash in order to record

 

 

still pictures in dark places.

≥Change the mode to .

Select the menu. (l27)

[PICTURE] # [FLASH] # [AUTO] or [ON]

≥This function’s default setting is [AUTO].

≥When the button is pressed halfway, the flash indicator will

appear in the bottom left corner of the screen. [ON]: ß

[AUTO]: ßA [OFF]:

≥The unit automatically determines if the flash is necessary even when it has been set to [OFF] by detecting the ambient

brightness. (If it determines that the flash is necessary, the

indication lights up in red when the button is pressed halfway.)

∫To adjust the brightness of the flash

≥The intelligent auto mode is set to off. (l 40) Select the menu. (l 27)

[PICTURE] # [FLASH LEVEL] # desired setting [ßj]: Less brighter

[ßd0]: Normal

[ßi]: Much brighter

65

VQT2B30