Preparation

6 Setting date and time

Setup

When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time.

¬Change the mode to .

1 Select the menu. (l 27)

[SETUP] # [CLOCK SET] # [YES]

2 Touch the date or time to be set, then set the desired value using / .

≥The year will change as follows: 2000, 2001, ..., 2039, 2000, ...

≥The 24-hour system is used to display the time.

≥ appears on the right top of the screen when [SET WORLD TIME] (l 34) is set to

[HOME], while appears when it is set to [DESTINATION].

Changing the date and time display mode Select the menu. (l 27)

[SETUP] # [DATE/TIME] # desired display style

≥You can also show or change the date and time display by repeatedly pressing the DATE/ TIME button on the remote control.

[DATE][D/T]

 

12:34

15. 11. 2009

15. 11. 2009

[OFF]

3 Touch [ENTER].

≥The clock function starts at [00] seconds.

≥A message prompting for World time setting may be displayed. Perform the World time setting by touching the screen. (l 34)

≥Touch [EXIT] or press the MENU button to exit the menu screen.

32

VQT2B30