Manual shutter speed/iris adjustment

Shutter Speed:

Adjust it when recording fast-moving subjects.

Iris:

Adjust it when the screen is too bright or too dark.

≥Press the MANUAL button. (l 68)

1 Touch [SHTR] or [IRIS].

2 Touch / to adjust settings.

1/100

F WB SHTR IRIS MF

SHTR : Shutter speed: 1/50 to 1/8000

≥If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/25 and 1/8000.

≥The shutter speed closer to 1/8000 is faster.

IRIS : Iris/Gain value:

CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB)

≥Value closer to [CLOSE] darken the image.

≥Value closer to [18dB] brighten the image.

≥When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.

≥Press the MANUAL button again to restore to the automatic adjustment.

≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.

Manual shutter speed adjustment

≥If you increase the shutter speed manually, the noise on the screen may increase.

≥You may see a band of light around the object that is shining very bright, or having very high reflection.

≥During normal playback, image movement may not look smooth.

≥If you record an extremely bright object or record under indoor lighting, colour and screen brightness may change or a horizontal line may appear on the screen. In this case, record in auto mode or set the shutter speed to 1/100 in areas where the power supply frequency is 50 Hz, or 1/125 in areas of 60 Hz.

Manual iris/gain adjustment

≥If the gain value is increased, the noise on the screen increases.

≥Depending on the zoom magnification, there are iris values that are not displayed.

70

VQT2B30