Indications 2 Messages
Major confirmation/error messages to be indicated on the screen in text.
RECOMMEND DATA BACK UP PERIODICALLY.*1, 2
We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit.
HDD BACKUP RECOMMENDED.*2
There is a possible problem with the HDD. Copy the motion pictures and still pictures stored on the HDD to a PC or a DVD disc immediately (l 100, 112), and detach the power and contact your dealer.
HDD ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.*2
Access to HDD failed. Turn on the power again. Make sure not to give a strong shock or impact to the unit.
CANNOT OPERATE DUE TO LOW TEMPERATURE.*2
The internal temperature of this unit is extremely low so it cannot be operated.
If “Please Wait.” appears after this message, wait a while without turning the unit off. It may take time until the unit can be used.
CHECK CARD.
This card is not compatible or it cannot be recognised by the unit.
If this message appears even though motion pictures and still pictures are recorded on an SD card, the card may be unstable. Reinsert the SD card, then turn the power off and then on again.
THIS BATTERY CANNOT BE USED.
≥Use a battery that is compatible with this unit. (l 17)
If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair. Detach the power and consult the dealer who you purchased this unit from. Do not attempt to repair it by yourself.
≥You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied AC adaptor. (l 21)
CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT.
≥The DVD burner is not correctly connected.
Disconnect and then reconnect the Mini AB USB Connection Cable.
≥Connect a DVD burner that is compatible with this unit. (l 100)
PLEASE CHECK EXTERNAL DRIVE OR DISC.
A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or the DVD burner is not recognised properly. Connect the Mini AB USB Connection Cable again and insert a disc to copy the data. (l 100)
DISCONNECT USB CABLE.
The unit cannot correctly establish the connection to the PC, printer. Disconnect and then reconnect the USB cable.
128
VQT2B30