Function

Effect/Setting method

 

 

Relay recording

It is possible to continuously record motion picture to an SD

card when there is no space available in the built-in memory.

≥Change the mode to .

Select the menu. (l27)

 

[RECORD SETUP] # [RELAY REC] # [ON]

 

≥

is displayed on the screen.

will disappear when space

 

 

in the built-in memory is gone and the recording to the SD card

 

 

starts.

 

 

 

≥ It allows to record only to SD card from built-in memory.

 

≥ Relay recording can only be performed once.

 

≥ Combine the scenes that were relay recorded using the

 

 

[RELAY SCENE COMBINE] into the SD card. (l 90)

 

≥ Once the relay recorded scene and the scene that was recorded

 

 

on the SD card after that are combined into the SD card using the

 

 

[RELAY SCENE COMBINE], it will be possible to perform the

 

 

relay recording again.

 

 

 

≥ If the [RELAY REC] is set to [ON] without performing the [RELAY

 

 

SCENE COMBINE], a message is displayed. You will be able to

 

 

perform relay recording by touching [YES], but you will not be able

 

 

to perform the [RELAY SCENE COMBINE] after that.

Anti-Ground-

If the unit continues to be tilted upside down from the normal

Shooting (AGS)

horizontal position while recording motion pictures, it is

 

automatically put into recording pause.

 

≥ Change the mode to

.

 

 

Select the menu. (l27)

 

 

[RECORD SETUP] # [AGS] # [ON]

 

Auto slow shutter

You can record bright pictures even in dark places by slowing

 

 

 

 

 

the shutter speed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥Change the mode to .

≥The intelligent auto mode is set to off. (l 40)

Select the menu. (l27)

[RECORD SETUP] # [AUTO SLOW SHTR] # [ON]

≥The shutter speed is set to 1/25 or more depending on the surrounding brightness.

60

VQT2B30