|
|
|
|
| ||
|
|
|
| Troubleshooting | ||
2 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Problem |
| Check points | |||
| This unit cannot be |
|
| |||
| turned on. |
|
|
| ≥ The battery protection circuit may have operated. Attach | |
| This unit does not stay |
|
| the battery to the AC adaptor for 5 to 10 seconds. If the unit | ||
|
|
| still cannot be used, the battery is faulty. | |||
| on long enough. |
|
| ≥ The battery is affected by ambient temperature. In cold | ||
| Battery runs down |
|
| places, the battery using time becomes shorter. | ||
|
|
| ≥ The battery has a limited life. If the operating time is still too | |||
| quickly. |
|
|
| short even after the battery is fully charged, the battery has | |
|
|
|
|
| worn out and needs to be replaced. | |
| This unit is turned off |
|
| ≥ If you connect to a TV compatible with VIERA Link with a | ||
| automatically. |
|
|
| HDMI mini cable and turn off the power on the TV with the | |
|
|
|
|
| remote control for the TV, the power on this unit also turns | |
|
|
|
|
| off. If you are not using VIERA Link, set [VIERA Link] to | |
|
|
|
|
| ||
≥When this unit is connected to a DVD burner to copy or play back images (a disc is being accessed), the power turns off automatically if the Mini AB USB Connection Cable is removed.
A clicking sound is heard when the unit is shaken about.
Remaining battery indication is not displayed properly.
≥This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit’s power is turned on.
≥The remaining battery capacity indication is an approximation.
If you think the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. (Even if this operation is performed, it may not be possible to display the remaining battery capacity correctly if the battery was used for a long period of time where the temperature was low or high or if the battery was repeatedly charged.)
This unit cannot be operated though it is turned on.
This unit does not operate normally.
≥Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.)
≥If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
133
VQT2B30