Philips HTS2200/93 Update software, Change preference settings, Check software version

Change preference settings

1Press- .

2Select [Preference Setup], then press OK.

3Select and adjust the following settings:

•[Audio] : Selects audio language for video.

•[Subtitle] : Selects subtitle language for video.

•[Disc Menu] : Selects menu language for video disc.

•[Parental] : Restricts access to discs that are recorded with ratings. To play all discs irrespective of the rating, select level ‘8’.

•[PBC] : Displays or skips the content menu for VCD and SVCD discs.

•[Password] : Sets or changes a PIN code to play a restricted disc. Enter ‘0000’ if you do not have a PIN or if you have forgotten your PIN.

•[DivX Subtitle] : Selects a character set that supports the DivX subtitle.

•[Version Info.] : Displays the software version for the home theater.

•[Default] : Resets the home theater to the default settings programmed at the factory.

4Press OK to con rm your choice.

Note

•If your preferred disc language is not available, you can select [Other] from the list and enter the 4-digit language code which can be found at the back of this manual.

•If you select a language that is not available on a disc, the home theater uses the default language of the disc.

•You cannot reset disc lock, password (PIN code) and parental control settings to their default values.

7Update software

To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site.

Check software version

1Press- .

2Select [Preference Setup] > [Version Info.], then press OK.

» The software version is displayed.

Update software from a CD-R or USB

1Check for the latest software version on www.philips.com/support.

•Search for your model and click on ‘software&drivers’.

2Download the software onto a CD-R or USB storage device.

3Insert the CD-R or connect the USB storage device to the home theater.

4Follow the instructions on the TV to con rm the update.

»When complete, the home theater automatically switches off and on again.

•If not, disconnect the power cord for a few seconds and then reconnect it.

Caution

•Do not turn off the power or remove the CD-R or USB storage device when the software update is in progress because you might damage the home theater.

12EN