9Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back or bottom of your product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this home theater do not work.
•Disconnect the home theater from the power outlet for a few minutes, then reconnect.
Picture
No picture.
•Ensure that the TV is switched to the correct source for this home theater.
•If this happens when you change the
TV system, switch to its default mode: 1) Press 
. 2) Press 
. 3) Press 
.
•If this happens when you switch on the progressive scan mode, switch to its default mode: 1) Press 
. 2) Press 
. 3) Press 
.
Sound
No sound.
•Ensure that the audio cables are connected and select the correct input source (for example, 
) for the device you want to play.
No sound fromTV program.
•Connect an audio cable from the audio input on the home theater to the audio output on the TV, then press 
repeatedly to select the correct audio source.
Distorted sound or echo.
•Ensure that the TV volume is muted or set to minimum if you are playing audio through the home theater.
Play
Disc cannot be played.
•Clean the disc.
•Ensure that the home theater supports the disc (see ‘Product speci cations’ on page 13).
•Ensure that the home theater supports the region code of the DVD.
•For DVD±RW or DVD±R, ensure that the disc is nalized.
DivX video les cannot be played.
•Ensure that the DivX le is encoded according to the ‘Home Theater Pro le’ with the DivX encoder.
•Ensure that the DivX video le is complete.
DivX subtitles do not display correctly.
•Ensure that the subtitle le name is the same as the movie le name.
•Select the correct character set: 1) Press 
- 
. 2) Select [Preference Setup]. 3) Select [DivX Subtitle]. 4) Select a supported character set. 5) Press OK.
The contents of a USB storage device cannot be read.
•Ensure that the format of the USB storage device is compatible with the home theater
(see ‘Product speci cations’ on page 13).
•Ensure that the USB storage device is formatted with a le system that is supported by the home theater.
‘No entry’ or ‘x’ sign appears on theTV.
•The operation is not possible.
14EN
