2.2 Programming
Parameter DescriptionsThe parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").
IP Address Settings
Parameter & Description | Default | Value Range | |
|
|
| |
# IP Address | 192.168.1.200 | The following addresses | |
Specifies the IP address of the card. |
| are invalid: | |
| • | Class D addresses | |
For more information, consult your network administrator. |
| ||
| • | Class E addresses | |
|
| ||
|
| • | Loopback |
|
|
| addresses |
|
| • | Addresses with |
|
|
| host number all 0s |
|
|
| or 1s |
|
|
| |
# Subnet Mask | 255.255.255.0 | Any address is valid. | |
Specifies the subnet mask address of the card. |
|
|
|
For more information, consult your network administrator. |
|
|
|
|
|
| |
# Default Gateway | 0.0.0.0 | Same as the parameter | |
Specifies the default gateway IP address of the card. |
| IP Address, except that | |
| the address 0.0.0.0. is | ||
For more information, consult your network administrator. |
| ||
| allowed. | ||
|
| ||
|
|
|
|
DHCP Settings |
|
|
|
|
|
| |
Parameter & Description | Default | Value Range | |
|
|
| |
# DHCP Server | Don't use | Use, | |
Specifies the use of a DHCP server. |
| Don't use | |
|
|
| |
For details, refer to "Detailed Explanations". |
|
|
|
|
|
| |
# DHCP Server Port No. | 67 | 1 to 65535 | |
Specifies the port number for DHCP communications by the |
|
|
|
DHCP server. |
|
|
|
Generally, there is no need to change the default value. |
|
|
|
|
|
| |
# DHCP Client Port No. | 68 | 1 to 65535 | |
Specifies the port number for DHCP communications by the |
|
|
|
card (the DHCP client). |
|
|
|
Generally, there is no need to change the default value. |
|
|
|
|
|
| |
# DHCP Lease Time (min) | 1440 | 0 (disable), | |
This parameter is provided for engineer use only. |
| 1 to 1440 | |
|
|
| |
|
|
|
|
Programming Guide | 11 |
|
|