1.1 Starting the IP-GW16 Maintenance Utility

1.1Starting the IP-GW16 Maintenance Utility

There are 2 different log-in levels to the IP-GW16 Maintenance Utility, a web programming utility for the VoIP Gateway Card: Administrator level and Installer level. These levels provide different programming options.

For full discussions of Administrator-level programming and Installer-level programming, refer to "2 Administrator Functions" and "3 Installer Functions", respectively.

System Requirements

•The IP-GW16 Maintenance Utility requires Microsoft® Internet Explorer 5.0 or above.

Trademarks

•Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

•All other trademarks identified herein are the property of their respective owners.

•Screen shots reprinted with permission from Microsoft Corporation.

1.Run Internet Explorer from the Start menu.

2.In the Address box of Internet Explorer, type http://192.168.1.200. 192.168.1.200 is the default IP address of the VoIP Gateway Card.

3.Press the ENTER key on the keyboard.

4.In the Username box, type the user name.

•Default Administrator-level user name: Administrator

•Default Installer-level user name: Installer

5.In the Password box, type the password.

•Default Administrator-level password: Administrator

•Default Installer-level password: Installer

6.Click LOGIN.

To clear your entry, click CLEAR.

4 Programming Guide