2.2 Programming
Parameter | To Card A | To Gateway Group 1 |
|
| (Cards B and C) |
|
|
|
Remaining Number of Digits | 3 | 4 |
|
|
|
GW No/Group No. Selection | GW | Group |
|
|
|
GW No/Group No. | 0 | 1 |
|
|
|
The automatic route redirection feature activates in this configuration. If a call is made through card A to gateway group 1 when all 16 channels of card B are busy, card A automatically redirects the call to card C.
This is possible because by grouping, PBX 1 sees PBX 2 as having a combined set of 32 channels, not 2 separate sets of 16 channels.
Note
The automatic route redirection feature cannot be used in a network where a gatekeeper is used. For details about gatekeeper settings, refer to "Gatekeeper Settings" in "2.2.2 H.323 Parameters".
40 Programming Guide