2.2 Programming

 

 

 

 

 

 

 

 

 

Parameter & Description

Default

Value Range

 

 

 

 

 

* Digit End Code

#

0 to 9, #, *

 

Specifies the delimiter code to be used to signal the end of a

 

 

 

dial number.

 

 

 

Generally, there is no need to change the default value.

 

 

 

 

 

 

 

Others

 

 

 

 

 

 

 

Parameter & Description

Default

Value Range

 

 

 

 

 

Network CODEC of IP-PBX

Not applicable

G.711 Mu-Law,

 

The value of this parameter is set automatically as

 

G.711 A-Law

 

 

 

 

appropriate to the setting of the PBX.

 

 

 

There is no need to change the value.

 

 

 

 

 

 

Programming Guide

27