Philips LX3600 warranty Connecting TV, Using Composite Video jack Cvbs

Connections

Step 4: Connecting TV

			COMPONENT					COMPONENT
		S-VIDEO	VIDEO IN				S-VIDEO	VIDEO IN
	AUDIO	IN	Pr/Cr			AUDIO	IN	Pr/Cr
	OUT					OUT
			Pb/Cb					Pb/Cb
		VIDEO IN					VIDEO IN
			Y					Y
2			1	2		1
	VIDEO OUT							FM
AUDIO					AUDIO	VIDEO OUT
	Y	CVBS				Y	CVBS

L	L
	Pb

REAR	SUB-				AR	SUB-
LEFT	W				FT	W
	R					R
	TV IN AUX-IN LINE-OUT	Pr	Pb	S-VIDEO		TV IN AUX-IN LINE-OUT	Pr	Pb	S-VIDEO

E n g l i s h

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV system.

–Connect the DVD system directly to the TV.

Using Composite Video jack (CVBS)

1Use the composite video cable (yellow) to connect the DVD system’s CVBS jack to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/ red) to connect TV IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV.

IMPORTANT!

–Component Video connection provides higher picture quality. This option must be available on your TV.

–The progressive scan video quality is only possible through Component Video (Pr Pb Y) output.

Using Component Video jacks (Pr Pb Y)

1Use the component video cables (red/ blue/green) to connect the DVD system’s Pr Pb Y jacks to the corresponding Component video input jacks (or labeled as Pr/ Cr Pb/Cb Y or YUV) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/ red) to connect TV IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV.

3If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability) set the Progressive setup to ‘ON.’ Otherwise, set it to ‘OFF’ (see page 34.).

13

001-046_LX36_17_Eng	13	3139 115 22851
		29/08/2003, 2:44 PM