Other Functions
Setting the Sleep timer
The sleep timer enables the system to switch to Eco Power standby mode automatically at a preset time.
●Press SLEEP on the remote repeatedly until it reaches the desired preset
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15…
➜SLEEP will show on the display panel, except if "OFF" is selected.
➜Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed.
"SLEEP10" ™ "SLEEP9".... ™ "SLEEP1" ™ "SLEEP"
To cancel the sleep timer
●Press SLEEP repeatedly until "OFF" appears or press the STANDBY ON (B) button.
Switching on/off
Switching to active mode
●Press the SOURCE control to select : DISC ™ FM ™ AM™ TV ™ AUX ™
DISC ....
OR
Press DISC,TV,TUNER or AUX on the remote.
Switching to Eco Power standby mode
●Press STANDBY ON (B).
➜ The display screen will go blank.
Recording to an external device
1Connect the external recording device to
LINE OUT.
(See pages 16
2Select the source to record from your DVD system (DISC,TUNER,TV or AUX).
3For ultimate recording, press SOUND to select ‘CLASSIC’ or ‘CONCERT’ and press SURR to select ‘STEREO’.
4Start recording on the external recording device.
Helpful Hint:
– Refer to the owner’s manual of the connected equipment for details.
Using the remote to operate your ‘Philips’ television
4
1
2
3
1Press and hold TV to turn on your TV.
2Press ¡1 / 2™ or use the numeric keypad
3Press TV VOL +/- to adjust the TV’s volume level.
4Press and hold B to turn off your TV.
Helpful Hint:
– When listening to TV or AUX programs, press TV or AUX on the remote to set the DVD system to TV or AUX mode in order for the sound to be heard.
E n g l i s h
41
41 | 3139 115 22851 | |
29/08/2003, 2:45 PM |