4. Remove 2 screws “E” from the Left Side - Light Barrier Guide and remove this Guide.
5. Grasp the corners of the Chassis Frame and slide in towards you about a inch.
This is required in order that 3 metal cleats (AC36) holding the front edge of the Chassis Frame are
released.
6. While holding the back edge of the Chassis Frame down, grasp the Panel Mounting Bracket (AC21)
and slightly lift the front of the Chassis Frame.
Service Detail - C
7. With the rear of the Chassis slightly raised, slide the entire Chassis forward (toward the Cabinet Front),
just far enough that the Rear Jack Panel (AC08) clears the Left Side Mounting Block (for the Lower
Back Cover).
Service Position Detail - D