Error Code Table Error
number
Explanation Valid for
PEMG99
Addresses
in HCS Remarks
0 No error X X
1 FBX 3V3 protection X X
2 No Horizontal Flyback protection X X GDE reported critical error
HFB error
3 X-Ray protection
Significance changed to:
GDE critical error – Vertical
Output Failure
X Must have been supported by
GDE. But it is not so.
GDE reported critical error
4 +5V protection active (detected via
MSP34xx & tuner) X X
5 HOP POR not successful X X GDE reported critical error –
HOP Initialization Failure
6 General I2C error main I2C bus X X
7 Mains Dip error
Significance changed to:
GDE critical error – DAC
Initialization failure
X
X
Cannot be supported in HCS
since the hardware supports.
GDE reported critical error
8 3D Comb filter I2C communication
error
X X
9 Bocma IC TDA888xx 8V failure
(SUP bit)
Significance changed to:
HCS-GDE communication failure
X
GDE did not communicate
with Initialization complete
message.
10 NVM IC STM24xxx I2C
communication failure
X X
11 New NVM IC error (NVM_
IDENTIFICATION_ERROR) X X
12 Main uP (Painter) Internal RAM test
failure X X
13 Main tuner I2C failure UV13xx X X
14 Sound IC MSP34xx I2C failure X X
15 SRAM IC uPD431000A-B test
failure X X
16 PIP/DW Tuner (ETA50) I2C failure X X
17 PIP IC M65669SP I2C failure or
Double window IC SAB9081 I2C
failure
X X