8. Now, lift the back edge of the Chassis Frame (nearest you), up while also lifting (slightly), the front edge
to slide forward in to the Service Position shown.
Service Position Detail - E
Mirror Mounting Board (AC18)
1. Remove 6 screws located in the mirror mounting board brackets and remove the board.
Note: Care should be taken NOT to place fingerprints or smudges on the mirror.
Side Back Covers
1. Remove 4 screws (F) from each of the Side Back Covers. (Some prying may be necessary to dislodge
covers.
Note: This allows access to the Side Jack Panel and Left and Right Speakers.
Large Signal Panel
1. Remove 3 screws from center of the CBA and pull 3 tabs on right of bracket.
2. Lift right side of LSP and slide panel up and out.
Power Supply Panel
1. Remove 4 screws from CBA.
2. Lift PFC Filter Panel up and out.