English

Installation

IMPORTANT!

The type plate is located at the rear of the system.

Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.

Never make or change any connections with the power switched on.

Step 1: Connecting speakers

1Place the main set with the front side facing down on a flat and firm surface.Then remove the detachable cover on the back of the set to expose the terminals available for connection.

2Connect the two front speaker cables to the SPEAKERS terminals: right speaker to "RIGHT" and left speaker to "LEFT".

Notes:

Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

For optimal sound performance, use the supplied speakers.

Do not connect more than one speaker to any one pair of +/- speaker terminals.

Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Connecting the wireless subwoofer

Power on both the main set and subwoofer.

Wireless connection will set up automatically.

In case the wireless connection fails due to conflict or strong interference etc., you may need the following procedures for manual pairing:

1In standby mode, press and hold 2; on the set for three seconds.

“PAIRING” flashes on the display screen.

2Press and hold the PAIR button on the rear of the subwoofer for three seconds.

The LED indicator on the subwoofer flashes.

If the connection succeeds, the display shows “PAIR OK”.

If the connection fails or the connection cannot be set up successfully within 60 seconds, the display shows “PAIR FAIL”.

Notes:

The wireless connection will be disconnected automatically after power-off.

See “Basic Functions - Switching the system to Eco Power Standby mode” for how to switch between Eco Power Standby mode and standby mode.

Step 2: FM antenna connection

Connect the supplied FM antenna to the FM AERIAL terminal.

Step 3: Connecting TV

IMPORTANT!

You only need to make one video

connection from the following options, depending on the capabilities of your TV.

12

Page 12
Image 12
Philips MCD289 Installation, Connecting speakers, FM antenna connection, Connecting TV, Connecting the wireless subwoofer