English
Wireless PC link
Network utilities
Check connection
Perform a quick check of your wireless PC link connection.
Change of USB port using the MC W770
The installation of the MC W770 is optimised for the USB port used during installation. Therefore the supplied wireless USB adapter should be connected only to this specific USB port.
Changing the USB port can have the following disadvantages (Windows XP, 2000 and newer):
–Connecting MC W770 to your PC can require up to 2 minutes
–In some cases a new installation of wireless USB adapter driver can be necessary
If you nevertheless want to change the USB port (e.g. because you are using a USB hub), proceed as described below.
1Connect the wireless USB adapter to the new USB port.
➜Windows will recognise it and will load the appropriate drivers. Windows may display a warning that the driver is not approved by Microsoft (message differs with Windows version). Ignore the message and continue with the installation.
0If the correct driver is not found, cancel and use Installation of the wireless USB adapter in Custom installation first.
2Enter Network Utilities, select Install different USB port and click on Start.
➜The configuration on PC side is checked and, depending on the PC configuration, the following window will appear:
Click on Next to continue.
10