English
Custom Installation | Wireless PC link |
4Press PC LINK A on the additional audio system for at least 5 seconds until INSTALLING is scrolled on the set.
➜The set searches for a connection to the PC.This can require up to about a minute. When the connection is established, Next is activated.
Note: If the additional audio system is not an MC W770, please look at the user manual of the device on how to enter the installation mode.
Click on Next.
5 ➜ The installation steps will be executed automatically by the PC. Afterwards PC LINK and COMPLETED are displayed on the set and the following window will appear:
Click on Exit and the installation is finished.
Installation of an additional PC server or recovery of PC link settings on your PC
If you want to use your MC W770(s) together with more than one PC, you have to install the Philips Media Manager Software and the PC link setting on your PC. A wireless USB adapter is required. If you want to use a different network adapter as bypacked with the MC W770 proceed according to chapter “Using a different wireless network adapter” (Please note that a proper function cannot be guaranteed by using a different network adapter).This procedure can also be used when your PC link settings on your PC are lost or destroyed.
If you use the bypacked wireless USB adapter proceed as follows:
1Enter the Custom installation menu on PC side, select Add New PC server and click on Install.
➜You will be asked if you want to install the driver for the wireless USB adapter.
2If the driver is not installed and you want to use it: Click on Yes.
➜The drivers will be installed and the PC has to be rebooted.
If the wireless USB adapter is already installed: Click on No.
4
