Playback features
Programming track numbers
Programming tracks is possible when playback is stopped.You can select up to 99 tracks (also MP3 tracks) and store them in the memory. Programming is possible from the current selected disc only.Therefore you cannot combine MP3 tracks and audio tracks or tracks from more than one CD.
CD | TUNER | AUX | PC LINK |
CD1 CD2 CD3
CD4 CD5
VOL
ALBUM
BROWSE 
REPEAT PROGRAM SHUFFLE DISPLAY
SLEEP | CLOCK TIMER TIMER ON/OFF |
1Load the desired disc in the disc tray.
2In case a source other than CD is active (e.g.TUNER) press SOURCE on the unit repeatedly until CD is selected or press CD on the remote control.
3Press PROGRAM on the remote control to enter the program menu.
➜ PROGRAM starts blinking.
Note: If no button is pressed within 20 seconds the unit will automatically exit from the program menu.
4Press 4 or ¢ repeatedly to select the desired track.
Press ALBUM 5 or ALBUM ∞ to find the album number you wish to select and then press 4 or ¢ repeatedly to skip to the desired track.
5Press PROGRAM on the remote control to store your selection in the memory.
➜CD 1 (or 2, 3, 4, 5), P with the total number of tracks programmed and the total playing time are displayed.
➜The number of the programmed track and PROG are displayed.
➜CD 1 (or 2, 3, 4, 5) and P with the total number of tracks programmed are displayed.
➜The album number and track number of the programmed track are displayed.
6Repeat steps
Notes:
If you try to store more than 99 tracks, PROGRAM FULL will be displayed.
If the total playing time of the program has reached 100 minutes
7Press STOP Ç once to end programming.
0To start playback of the program press ÉÅ.
Clearing the program
1If necessary press STOP Çto stop playback.
2Press STOP Çagain to clear the program.
➜PROGRAM goes off and PROGRAM CLEARED is scrolled.
Note:The program will be also erased if you open the disc tray, if you switch to another source or if you disconnect the unit from power supply.
English
27
