Philips MCW770 General information, Environmental information, Maintenance, Disc handling, Setup

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your unit consists of materials which can be recycled if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

Maintenance

Clean the unit with a soft, slightly dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect.

Do not expose the unit, batteries or discs to humidity, rain, sand or excessive heat (caused by

General information

Disc handling

To take a disc out of its box easily, press the centre spindle while lifting

it. After use, always take the disc out of the unit and store it in the disc case.

Never attach a sticker to a disc. If you want to provide a disc with an inscription use a soft felt-tipped pen and write only on the printed side.

To clean a disc, wipe it in a straight line from the centre towards the edge using a soft, lint-free cloth. Any cleaning agents may damage the disc!

Setup

Place the unit on a flat, hard and stable surface.

Do not position the unit on top of other equipment that might heat it up (e.g. receiver or amplifier).

English

heating equipment or direct sunlight).

Always keep the trays of

your unit closed to protect the lens from dust. If the unit fails to read discs correctly use a commonly available cleaning-CD to clean the lens before submitting the unit to repair. Other cleaning methods may destroy the lens.

Place the apparatus in a location with adequate ventilation to prevent internal heat build up. Allow at least 10 cm (4 inches) clearance from the rear and the

top of the unit and 5 cm (2 from each side.

10	10 cm
	4 inches
4 cm
inches
5 cm	5 cm
	2 inches
2 inches
inches)

The lens may cloud over when the unit is moved from cold to warm surroundings. Playing a disc is not possible then. Leave the unit in a warm environment until the moisture evaporates.

The apparatus shall not be exposed to dripping or splashing.

Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

Do not block any ventilation openings.

11