Wireless PC link playback
English
IMPORTANT !
For preparation, please refer to the “Wireless PC Link Quick Installation” and www.philips.com/support.
PC LINK function
PC LINK enables you to playback your music collection from the PC via the set. Before playback can be started the connection to an installed network/server must be started. Make sure the wireless USB adapter is connected or another network connection is working properly.
CD | TUNER | AUX | PC LINK |
CD1 CD2 CD3
CD4 CD5
VOL
1Switch on your PC and wait until the PC boot is ready.
2Press PC LINK A to select the PC as source.
➜PC LINK is displayed.
➜SERVER is displayed and the last active server name is scrolled.
➜The last active server name is displayed and CONNECTING is scrolled.
Note: If no PC server is installed PC LINK is displayed and NOT INSTALLED is scrolled. Install the PC server (see “Wireless PC Link Quick Installation”).
3As soon as the connection is established:
➜PC LINK is displayed and a track name is scrolled.
Note:The last played track will have been stored and will be selected automatically.
However, if you switch from one PC server to another, the first track will be selected.
How to display the current server name
0To display the current server name press PC LINK A while the display is neither showing a server name nor a network name.
➜SERVER is displayed and the current server name is scrolled.
How to select another PC server
0To switch between further installed PC servers (see www.philips.com/support) press
PC LINK A.
➜SERVER is displayed and the next server name is scrolled.
To select the displayed server press 4 or
¢as often as necessary while a server name is shown.To confirm the selected server press ALBUM ∞.
How to select another network
1To switch between further installed PC networks (see www.philips.com/support) press
PC LINK A and then ALBUM 5 to enter the network display.
To select the displayed network press 4 or ¢ as often as necessary while a network name is shown.To confirm the selected network press ALBUM ∞.
Note: If the network is not available the first server name is displayed and
NO CONNECTION is scrolled.
2After connecting the network a PC server will be selected automatically.
➜The server name is displayed and CONNECTING is scrolled.
Note: If no connection has been detected the server name is displayed and NO CONNECTION is scrolled.
18