Basic functions
Setting the clock
VOL
ALBUM
BROWSE 
REPEAT PROGRAM SHUFFLE DISPLAY
SLEEP | CLOCK TIMER TIMER ON/OFF |
RDS/NEWS DIM DSC VEC
1Press and hold CLOCK on the remote control for more than 2 seconds.
➜SET CLOCK is displayed, the hours and minutes digits start blinking.
2Press ALBUM 5 or ALBUM ∞ on the remote control repeatedly to set the hour.
3Press 4 or ¢ on the remote control repeatedly to set the minutes.
4Press CLOCK on the remote control to confirm the setting.
➜The clock shows the set time.
0To exit without storing the clock setting press STOP Ç.
Notes:
The clock setting will be erased when the
system is disconnected from the power supply. The unit will exit from the clock setting
mode if no button is pressed within 90 seconds.
Displaying the clock
This function shows the set time.
●In any mode (except in clock or timer setting) press CLOCK on the remote control repeatedly to switch between the clock display and the normal display.
Note: If you press a button during the clock display that changes the display, the information related to the pressed button will be shown briefly. Afterwards the clock will be displayed again.
Dim mode
With this function you can control the brightness of the display.
SLEEP | CLOCK TIMER TIMER ON/OFF |
RDS/NEWS DIM DSC VEC
HOME MUTE
●In standby mode press DIM on the remote control repeatedly to switch between:
➜The clock is displayed with half brightness.
➜The clock is displayed with full brightness.
●Select a source (CD, AUX,TUNER or PC LINK) and press DIM on the remote control repeatedly to switch between:
➜DIM 1: indicator lights on, display full brightness, spectrum analyser off
➜DIM 2: indicator lights on, display half brightness, spectrum analyser on
➜DIM 3: indicator lights off, display half brightness, spectrum analyser off
➜DIM OFF: indicator lights on, display full brightness, spectrum analyser on
English
21
