16 ➜ The new network settings are stored in the MC W770 and ready for using in normal operation of the set.The following window appears:
Click on Exit to close the network setup programme on the PC.
Wireless PC link
English
17The MC W770 will automatically exit the Expert Install mode and will go into normal operation. It will setup a network for normal operation.
18Now you have to set up your PC wireless adapter to the network which has just been stored to the MC W770, so both can connect in normal mode too (the wireless adapter is still set up for Expert Install mode).To do this, use your wireless adapters utility software again. For correct function, the IP address of the PC has to be set properly too.
19On PC installation software press Next/Next/Finish to exit the PC installation.
20Please do not forget that for successful operation the Philips Media Manager Software has to be set up too and operate on a PC which is part of the network you have just set up.
If more than one network configuration is stored into the MC W770, you might select the one which has just been set up (see How to select another network in chapter “PC link function”). Otherwise (one network configuration stored into the MC W770) the audio set will connect to network/PC and your PC link is fully operational.
19
