English
Troubleshooting
WARNING
Under no circumstances should you try to repair the unit yourself as this will invalidate the warranty. Do not open the unit as there is a risk of electric shock.
If a fault occurs, first check the points listed before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center.
Laser safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
Problem | Solution | |
No power | – | Make sure the power cable is connected properly. |
| – | Press |
No sound or sound | – | Adjust the volume. |
of poor quality | – | Disconnect the headphones. |
| – | Make sure the speakers are connected properly. |
| – | Correct the sound settings on the unit. |
| – | Make sure the unit is not muted. |
No reaction to controls – | Disconnect the unit from power supply, reconnect after | |
|
| a few seconds. |
The remote control | – | Point the remote control directly towards the IR sensor on the |
does not work properly |
| unit. |
| – | Remove batteries, wait 10 seconds and insert them |
|
| correctly or insert new batteries. |
| – | Reduce the distance between remote control and unit. |
| – | Always select the source you wish to control first by pressing |
|
| one of the source keys on the remote control (e. g. CD, |
|
| TUNER).Then select the desired function (e.g. á, à, É). |
Permanent feature | – | Press and hold for 5 seconds STOP Ç on the unit until |
display on the unit |
| DEMO OFF is displayed to switch off the demonstration mode. |
(demonstration mode) |
|
|
The timer is not | – | Set the clock correctly. |
working | – Press TIMER ON/OFF on the remote control to activate the | |
|
| timer. |
32
