11 | ENGLISH |
|
|
Connection to the computer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| figure 3 |
|
| |||
|
|
|
|
|
|
| ||||
figure 2 |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
D-SUB
VIDEO H/H+V V
1.Connect the male plug of the mini
2.(Alternative) Connect the BNC connectors (VIDEO/H/V) of the video cable to thesocket on the back of the monitor as shown in figure 3. In this configuration, the three guns will be automatically ‘locked’ (the monitor is driven as ‘mono- chrome’).
RGB H/H+V V
DAISY CHAIN
Important !
to prevent bad connection and to ensure a proper fit, tighten the thumbscrews.
3.(Alternative) Connect the BNC connectors (R/G/B/H/V) of the video cable to the socket as in § 2. (see figure 4). In this configuration, the guns are driven inde- pentently (the monitor is seen as ‘colour’).
4.If you use some monitors in Daisy Chain configuration, the units shall be con- nected each other as shown in figure 5.
5.Connect the other end of the video cable to the VIDEO OUTPUT of your PC (with high resolution graphic card or usual VGA graphic card).
Note: The monitor automatically recognizes the connected input.
The 15 pins
