Philips MGD403, MGD203 user manual English

ENGLISH 4

The monitor will automatically sychronise within a wide range of scanning frequencies and determine the specific operating mode.

Monitor behaviour (degauss & reset), image quality and screen geometry adjustments can be changed or selected via the hardware OSD by means of the front panel push-buttons.

Your new monitor provides special features as:

´Very high contrast, high definition image.

´Digital brightness uniformity control (higher than 90%).

´Automatic correction of the effect of the horizontal magnetic field.

´Digital correction of geometric distortions.

´Automatic calibration (with optional light probe and software tool).

´Incredible high contrast (750 cd/sqm for 21” - 900 cd/sqm for the 17”).

´Universal power supply.

´Interactive On Screen Display with a rich set of functions for easy installation and cus-

tomization.

´ Fully autoscan from 30 to 95 KHz (Horizontal Frequency) 50 to 170 Hz (Vertical Frequency).

´Most common video modes already factory stored in the monitor memory.

´Large number of free memory locations to store up to 16 user-defined video modes.

´Full compatibily with all mono and color video cards, progressive and interlaced timing

´Black Level Stabilization for quick warm-up (4 min.) and perfect contrast stability over time.

´Integrated Ambient Light Compensation control function.

´RS 485 - like ’Daisy chain’ bus connection (up to 15 monitors), allows simultaneous adjustment of each enabled monitor from each monitor’s keyboard.

´RS 232 serial connection to host computer or service laptop.

´Large number of functions available through the interactive On Screen Display, (including also Hours of Operating, Horizontal Scan Rate, Vertical Refresh Rate) to allow easy installation and optimal operation.

´Orbiting function to increase CRT lifetime.

´Loop-through input facility makes the connection of more monitors to the same video source easy and economical.

´Flexible inputs selection: 3 BNCs (for mono drivers), 5 BNCs or 15 pin D-sub (for color drivers).

´Six user selectable combinations of max Brightness and max Contrast

(5 preset + 1 available to the user).

´Direct key access for most commonly used user commands: BRIGHTNESS up/down, CONTRAST up/down, REF. SETTING, USER SETTING, USER STORE, KEYBOARD UNLOCK.

´Automatic Brightess Control programmable.

´Multi-level Keyboard lock facility.

´Number of hours of operation recorded and readable at any time.

´Power Saving (VESA DPMS) function according to latest Environmental

Regulations & Reccomendations, including also the Power Factor (IEC 555-2) control cir- cuit.