ENGLISH | 14 |
|
|
HARDWARE ON SCREEN DISPLAY
An easy OSD menu to control and adjust by keyboard or mouse all the monitor parameters.
The H. OSD has five languages selectable by the user.
Hardware On Screen Display flow chart - MAIN MENU
OSD FUNCTIONS |
|
|
|
|
| GLOBAL MENU |
| LOCAL MENU |
|
____ |
|
|
| |
____ | DEGAUSS |
|
|
|
____ | KEYLOCK (ALL / STORE / CNTRL / OFF) |
|
| |
____ | ABC (FULL / REDUCED / OFF) |
|
|
|
____ | REF. SETTING (1 / 2 / 3 / 4 / 5) |
|
|
|
____ | LOCAL MENU | ____ | ABC MASTER (ON / OFF) | <1> |
|
| ____ | POWER SAV. (ON / OFF) |
|
|
| ____ | AUTO DEGAUSS (ON / OFF) |
|
|
| ____ | DAISY ADDRESS (ON / OFF) |
|
|
| ____ | DAISY CHAIN (ON / OFF) |
|
|
| ____ | INPUT |
|
|
| ____ | ORBITING (ON / OFF) |
|
|
| ____ | LIGHT BAR (ON / OFF) |
|
|
| ____ | OSD REVERSE |
|
|
| ____ | OSD POSITION |
|
|
| ____ | SHOW CONFIG. |
|
|
| ____ | STORE REF. SET. |
|
|
| ____ | H. SIZE |
|
|
| ____ | V. SIZE |
|
|
| ____ | H. SHIFT |
|
|
| ____ | V. SHIFT |
|
|
| ____ | TILT |
|
|
| ____ | ABC CONTRAST |
|
|
| ____ | ABC BRIGHTNESS |
|
|
| ____ | SERVICE MENU |
|
NOTES:
´The DIRECT KEY ENTRY functions are transmitted over the daisy chain (if enabled) to set all monitors with the same light paramiters (brightness and contrast)
´The OSD MENUs are meant for SERVICE purposes only
´The GLOBAL MENU functions are transmitted over the daisy chain (if enabled) to set all monitors with the same paramiters.
´The LOCAL MENU functions are intended for customising, NOT transmitted and only LOCAL executed.
<1> | This function is executed ONLY on the LOCAL unit (that is going to be defined as |
| local execution of the setting, the GLOBAL command “Reset All Master ABC Units” is transmitted over the Daisy- |
| Chain, in order to disable another (possible) already active Master unit. |
