E9017FD_EN.qx3 03.8.6 10:13 AM Page 20
DVD Setup
English
Audio Setting
Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD sys- tem.
1Press SYSTEM MENU/PROG in STOP mode.
2Press B to select CUSTOM, then press OK.
• CUSTOM mode will appear.
3Press s or B to select AUDIO, then OK to confirm.
4Press K or L to select the below items, then press OK.
DRC (Dynamic Range Control) :
To compress the range of sound volume.
The default setting is OFF.
DOLBY DIGITAL : QUICK Set to ON when the player is connect-
ed to Dolby Digital Decoder.
(ON : Output by Dolby Digital)
(OFF : Convert the Dolby Digital to PCM) The default setting is ON.
DOWN SAMPLING :
Set to ON when outputting in 48kHz.
The default setting is ON.
When playing disc with copyright Protection
•If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.
MPEG :
Set to ON when the player is connected MPEG Decoder. (ON: Output by MPEG)
(OFF: Convert the MPEG to PCM)
• The default setting is OFF.
5Press SYSTEM MENU/PROG to exit.
Speaker Balance
You can test the volume balance of each speaker with this pro- cedure.
1Press DVD to put the DVD system in DVD mode.
•The red DVD light will be on the front of the DVD system. Press STOP C to stop Disc playback if necessary.
2Press SYSTEM MENU/PROG.
•The QUICK SETUP screen will appear.
3Press B to select CUSTOM at the top of the menu, then press OK.
•This menu will appear.
4 Press B to select AUDIO at the top of the menu, then press OK.
5 Press p to select 5.1CH, then press OK.
6 Press p to select BALANCE, then press OK.
7TEST will be selected. Press OK.
•The test sound will come from each speaker (in the order indicated in the menu) so you can check the volume of each speaker.
8Press OK to stop the test.
9Press o or p to select the speaker for which you want to adjust the volume, then press OK.
•You will hear the test sound from that speaker.
10Press o or p to adjust the volume of the selected speaker, then press OK.
•The BALANCE menu will reappear, showing the value you selected for that speaker.The available volume range is
11Press SYSTEM MENU/PROG to remove the menu.
Note:
- You cannot hear the test sound from the Subwoofer.
Delay Time
Set the delay time for the Center and Rear (Surround) speakers to suit your listening position. If you usually sit closer to the Center speaker than the Front speakers, increase the Center delay time to improve the Surround Sound effect. If you plan to sit closer to the Rear speakers than the Front speakers, increase the Rear delay time.
1Press DVD to put the DVD system in DVD mode.
•The red DVD light will be on the front of the DVD system. Press STOP C to stop Disc playback if necessary.
2Press SYSTEM MENU/PROG.
•The QUICK SETUP screen will appear.
3Press B to select CUSTOM at the top of the menu, then press OK.
•This menu will appear.
4 | Press B to select AUDIO at the top of |
|
|
5 | the menu, then press OK. |
|
|
Press p to select 5.1CH, then press | AUDIO |
| |
DRC | OFF | ||
| OK. | DOLBY DIGITAL | ON |
| DOWN SAMPLING ON | ||
| MPEG | OFF | |
6 | 5.1CH |
| |
DELAY TIME will be selected. Press |
|
| |
OK.
7Press o or p to select CENTER or SURROUND (for the REAR speakers), then press OK.
8Press o or p to select a delay time in milliseconds, then press OK.
•The default setting for the CENTER Delay time is 0 ms.The default setting for the SURROUND (rear) Delay time is 5 ms.
9Press SYSTEM MENU/PROG to remove the menu.
Language Setting DVD-V
Language options are not available with some discs.
1Press SYSTEM MENU/PROG in STOP mode.
2Press B to select CUSTOM, then press OK.
•CUSTOM mode will appear.
3Press s or B to select LANGUAGE, then OK to confirm.
4Press K or L to select the below items, then press OK.
AUDIO :
Sets the audio language.
SUBTITLE :
Sets the subtitle language.
DISC MENU :
Sets the language for DVD Menu.
PLAYER MENU : QUICK
Sets the language for the
5Press K or L to select a setting, then press OK.
•If OTHER is selected in the AUDIO, SUBTITLE or DISC MENU screen, press
•Only the languages supported by the disc can be selected.
6Press SYSTEM MENU/PROG to exit.
Note:
-Language Setting for Audio and Subtitle is not available with some discs.Then use AUDIO and SUBTITLE. Details are on pages
20
