1Press OPTION.
2Press 3 or 4 to select SOURCE, then press 2 to enter its
3Press 3 or 4 to select YPbPr or YCbCr according to your TV setting.
4Press OK to confirm.
To exit the component video mode, press and hold RETURN.
7 Troubleshooting
If it appears that the
WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre.
Symptom | Remedy |
No power | • Check if both plugs of the mains cord are |
| properly connected. |
| • Check if there is power at the AC outlet by |
| plugging in another appliance. |
| • Check if battery pack is inserted appropriately. |
| • Check if car adaptor is connected appropriately. |
|
|
Distorted picture | • Check the disc for fingerprints and clean |
| with a soft cloth, wiping from centre to edge. |
| • Sometimes a small amount of picture distor- |
| tion may appear.This is not a malfunction. |
|
|
Completely distorted | The NTSC/PAL setting may be in the wrong |
picture / no colour in | status. Match your TV’s setting with the |
the TV screen | player’s setting. |
|
|
No sound | Check audio connections. If using a HiFi |
| amplifier, try another sound source. |
|
|
