3Click Printer.
•Make sure no check mark appears next to Pause Printing.
•Make sure a check mark does appear next to Set As Default.
1Press Power to turn the printer off.
2Disconnect the power supply cord from the wall outlet.
3Gently remove the power supply from the printer.
4Reconnect the power supply to the printer.
5Plug the power supply cord into the wall outlet.
6Press Power to turn the printer on.
If none of the previous options fixes the problem, uninstall the printer software, and reinstall it. For more information, see “Removing and reinstalling the software” on page 125.
Cannot print from digital camera using PictBridge
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital camera documentation.
1Disconnect the camera.
2Connect a
Use only the USB cable that came with the camera.
Remove the memory card or the flash drive from the printer.
Print troubleshooting
•“Improving print quality” on page 98
•“Poor text and graphic quality” on page 105
•“Poor quality at the edges of the page” on page 106
•“Partial document or photo prints” on page 107
•“Printer does not print or respond” on page 106
•“Print speed is slow” on page 106
Improving print quality
If you are not satisfied with the print quality of a document, make sure you:
•Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing photos or other high quality images.
•Use a paper that is a heavier weight, bright white, or coated.
•Select a higher print quality.
