Lexmark 8300 Series manual Can receive but not send faxes

Models: 8300 Series

1 136
Download 136 pages 11.06 Kb
Page 113
Image 113
113

7Press .

8Press .

Can receive but not send faxes

To make sure the printer is set for faxing, press Fax Mode.

Load the original document face down in the upper left corner of the scanner glass or text-side up in the ADF.

Check the Dial Prefix setting.

1Press Fax Mode.

2Press .

3Press or repeatedly until Dialing and Sending is highlighted.

4Press .

5Press or repeatedly until Dialing Prefix and the current Dial Prefix setting are highlighted.

6To change the setting, press or repeatedly until Modify is highlighted.

7Press .

8Enter the numbers you would like to have dialed before each telephone number.

9Press .

10Press .

If you used a Speed Dial button:

Check to make sure it has been programmed for the number that you wish to dial. See “Setting up Speed Dial” on page 80.

As an alternative, dial the telephone number manually.

Make sure the printer is detecting a dial tone.

See “Faxing while listening to a call (On Hook Dial)” on page 84.

Check the Dial Method setting.

1Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone.

2Press Fax Mode.

3Press .

4Press or repeatedly until Dialing and Sending is highlighted.

5Press .

6Press or repeatedly until Dial Method is highlighted.

Page 113
Image 113
Lexmark 8300 Series manual Can receive but not send faxes