Lexmark 8300 Series Installing another language control panel, Getting the printer ready to fax

Models: 8300 Series

1 136
Download 136 pages 11.06 Kb
Page 14
Image 14

Installing another language control panel

These instructions apply only if you received one or more additional language control panels with the printer.

1Lift and remove the control panel (if one is installed).

x

2Choose the correct control panel for your language.

3Align the clips on the control panel with the holes on the printer, and then press down.

x

Getting the printer ready to fax

You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If problems occur, see “Setup troubleshooting” on page 101.

Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is required.

You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to send and receive faxes.

You can connect the printer to other equipment. See the following table to determine the best way to set up the printer.

Equipment

 

Benefits

 

See this section

 

 

 

 

 

 

 

The printer

 

Send and receive faxes without using a

 

“Connecting directly to a

A telephone cord

 

computer.

 

telephone wall jack” on page 15

 

 

 

 

 

 

 

 

 

 

 

 

14

Page 14
Image 14
Lexmark 8300 Series manual Installing another language control panel, Getting the printer ready to fax