Lexmark 8300 Series manual

Models: 8300 Series

1 136
Download 136 pages 11.06 Kb
Page 58
Image 58

Using a PictBridge-enabled digital camera to control printing photos

Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the digital camera.

2Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see the camera documentation.

The printer reads only one media device at a time.

3Follow the instructions in the camera documentation to select and print photos.

Warning: Do not remove cables or media devices, or touch the printer while the light is blinking in the area shown.

58

Page 58
Image 58
Lexmark 8300 Series manual