1 General Safety Information

EN

Your device has been tested in conformity with standards EN 60950-1 and IEC 60950-1 and should only be oper- ated with telephone systems and power equipment that meet these standards. The device was built exclusively for use in the indicated sales region.

Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated.

Power Supply

Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.

Use only the power and telephones cables supplied.

Set up your device so that the power socket is easily acces- sible. The device does not have an on/off button. In an emergency, disconnect your device from the power supply by pulling the power plug.

Setting Up the Machine

The device should rest securely on a stabile, flat surface. If the device should fall, it can be damaged or can cause injury to people, especially small children. Position all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself.

The distance between the device and other devices or objects must be at least 15 centimetres; this also applies to the use of additional cordless telephones. Do not place the device in the vicinity of radios or televisions.

Lock the cover of the device completely into place when opening the device. You could be injured if the cover falls while you are working on the device.

Protect the device against direct sunlight, heat, large tem- perature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.

The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes. Do not place the machine on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits. Otherwise, the device can overheat and catch on fire.

In the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately pull the power cable out of the power socket. Have your device examined by trained professionals at a technical service location. To prevent the spread of fire, open flames should be kept away from the device.

Do not plug in the device in moist rooms. Never touch the mains cable, the mains connection or the telephone socket with wet hands.

Do not allow liquids to enter into the device. Disconnect the device from the power socket if liquids or foreign objects have entered the device and have your device exam- ined by trained professionals at a technical service location.

Do not allow children to handle the device without super- vision. The packing materials should be kept out of the hands of children.

The telephone handset of the device is magnetic. Caution, small metallic objects (paper clips) may be retained if placed near or on the telephone handset.

Never touch the power or telephone cable if the insulation is damaged. Replace damaged wires immediately. Use suit- able cables only; if necessary please contact our technical customer service or your retailer.

Disconnect your device from the power and telephone net- works during an electrical storm. If this is not possible, do not use the device during an electrical storm.

Before cleaning the surface of your device, disconnect it from the power and telephone networks. Use a soft, lint- free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device.

Only clean the display with a dry, soft cloth. If the display breaks, a mildly corrosive liquid may escape. Avoid all con- tact with your skin and eyes.

In the event of a power failure, your device will not func- tion; saved data is retained.

Repairs

Should disruptions occur, follow the instructions on the display and on the error report.

Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.

Do not remove the type label from your device; this would void the warranty.

Consumable Materials

Use only original consumable materials. These are availa- ble from a specialised retailer or through our order service (see back side of this user manual). Other consumable materials could damage the device or shorten its service life.

Dispose of old consumable materials according to the waste regulations of your country.

4

Philips · PPF 675

Page 3 Page 5
Page 4
Image 4
Philips PPF 675 user manual General Safety Information, Power Supply, Setting Up the Machine, Repairs, Consumable Materials
Page 3 Page 5

PPF 675 specifications

The Philips PPF 675 is a prominent model in the landscape of home printing technology, standing out for its versatility and functionality. This multifunctional device combines the capabilities of a traditional fax machine with that of a copier and an efficient laser printer, making it an ideal choice for both home office use and small businesses.

One of the key features of the Philips PPF 675 is its high-quality printing capabilities. It uses advanced laser technology to ensure crisp and clear printouts, with resolutions that can go up to 600 x 600 dpi. This ensures that text documents are sharp and readable, while graphics and images maintain their integrity. This printer is designed to handle various media types, from standard A4 paper to envelopes and labels, enabling users to tackle a range of printing tasks.

The device also incorporates a user-friendly interface that makes operation straightforward. With its intuitive LED display and simple button controls, users can quickly navigate through various functions, whether they are sending a fax, making copies, or printing documents. The inclusion of an automatic document feeder (ADF) streamlines the process for multi-page documents, allowing for efficient handling without the need for manual feed.

In terms of connectivity, the Philips PPF 675 does not limit users. It typically features a standard telephone line connection for faxing, and some models may offer USB connectivity, enabling seamless integration with computers. This means users can easily send and receive faxes directly from their computers without needing additional equipment.

The energy efficiency of the Philips PPF 675 is another noteworthy characteristic. Designed with environmental considerations in mind, it operates with low power consumption, especially in standby mode. This not only reduces electricity costs but also minimizes its carbon footprint.

Additionally, maintenance is made easy with the Philips PPF 675. The toner cartridges are generally easy to replace, with an easy access point that minimizes downtime. Users also benefit from long-lasting cartridges that deliver a significant number of prints before needing replacement, thus ensuring productivity remains high.

Overall, the Philips PPF 675 encapsulates the essential features for effective home and small office printing, faxing, and copying. Its blend of advanced technology, user-centric design, and energy efficiency makes it a reliable choice for anyone in need of a multifunctional device that doesn't compromise on quality or performance.
Top Page Image Contents