Connecting the Handset
Plug one end of the spiral cable into the socket on the tel- ephone handset. Insert the other end into the socket desig- nated with the ) symbol.
Connecting the Telephone Cable
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and there- fore it cannot be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for ana- logue terminals.
Connect the telephone cable to the device by inserting it in the socket designated with LINE
Ireland
When connecting to the telephone line socket, use only a
Connecting the Power Cable
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.
Insert the mains cable into the connection located on the rear side of the device. Plug the power cable into the elec- trical outlet.
Initial Installation
After you connect your device to the mains voltage, the ini- tial installation commences. Press i. Your device prints a help page.
EN
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a tel- ephone system, you must set it for working as an extension (also see Chapter Telephone connec- tions and additional devices, page 30).
Selecting the Language
1Use [ to select the desired display language.
2Confirm with OK.
Selecting the Country
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper- ating the device. Otherwise your device is not adapted to the telephone network. If your coun- try is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.
1Use [ to select the country in which you are operat- ing the device.
2Confirm with OK.
After this input, the device prints another help page and checks the telephone line.
Initial Operation · Connecting the Handset | 9 |
