Philips RQ1200 user manual Pull open the three shaving heads one by one

16ENGLISH

2 Pull open the three shaving heads one by one.

3Rinse all three shaving heads and all three hair chambers under a hot

tap for 30 seconds.

Note:You can also brush the shaving heads and hair chambers with the cleaning brush supplied.

Be careful with hot water.Always check if the water is not too hot, to prevent your hands from getting burnt.

4Carefully shake off excess water and leave the shaving heads open to let the shaving unit dry completely.

Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.

Cleaning the shaving unit in the Jet Clean System (RQ1296CC,

RQ1295CC, RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC,

RQ1280CC, RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC,

RQ1251CC, RQ1250CC only)

The Jet Clean System comes in two types:

-- Type RQ1008 has three cleaning programs: the eco program, the auto program and the intensive program. Press the up/down button to select the cleaning program you prefer.

Note:The eco program has a shorter drying time, to save energy.The intensive program is a more thorough cleaning program.

-- Type RQ1007 has one automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in the automatic cleaning program.  

Preparing the Jet Clean System for use

Fill the cleaning chamber before first use.

1Put the small plug in the Jet Clean System.

2Put the adapter in the wall socket.

,, The holder automatically moves to the highest position.