Toshiba RAS-M14EAV-E, RAS-M13EKCVP-E, RAS-M18EACV-E, RAS-M14EACV-E Clean operation times

Item		Operation flow and applicable data, etc.					Description
15. Clean							1. Purpose
operation							The clean operation is to minimize
			Unit now performing cooling or
			dry operation				the growth of mold, bacteria etc. by
							running the fan and drying so as to
							keep the inside of the air condi-
					Push "stop" button		tioner clean.
							Clean operation
							When the cooling or dry operation
			Only S.CLEAN indicator lights,
			and clean operation starts				shuts down, the unit automatically
							starts the clean operation which is
							then performed for the specified
				Time set now elapses			period based on duration of the
							operation which was performed
							prior to the shutdown, after which
					Operation stops
							the clean operation stops. (The
							clean operation is not performed
							after a heating operation.)
	• During clean operations: The louver opens slightly.						2. Operation
							1) When the stop signal from the
		The indoor fan operates continuously at a speed of					remote controller is received, the
		260 rpm.					S.CLEAN indicator (green) on the
		Clean operation times					main body lights, and the clean
							operation starts. (Neither the
		Operation mode			Operation time	Clean operation time	OPERATION indicator nor the
							TIMER indicator light.)
		Cooling:			Up to 10 minutes	No clean operation	2) The period of the clean operation is
		Auto (cooling)				performed (0 minutes)	determined by the duration of the
		Dry					operation performed prior to the
					From 10 minutes	2 hours
							reception of the stop code.
					up to 1 hour
							3) After the clean operation has been
					1 hour or longer	4 hours	performed for the specified period,
							the unit stops operating.
		Heating:			No clean operation performed
		Auto (heating)
		Auto (fan only)
		Shutdown

• To stop an ongoing clean operation at any time

Press the start/stop button on the remote controller twice during the clean operation. (After pressing the button for the first time, press it for the second time without delay (within 10 minutes).)

– 52 –