Toshiba RAS-M14EACV-E, RAS-M18EAV-E FILTER Indicator, How to Cancel the Auto Restart Function, 56

9-3-2. How to Cancel the Auto Restart Function

To cancel auto restart function, proceed as follows :

Repeat the setting procedure : the unit receives the signal and beeps three times.

The unit will be required to be turned on with the remote controller after the main power supply is turned off.

• When the system is on stand-by (not operating)

Operation		Motions
Push [RESET] button for more than	The unit is on standby.
three seconds. (Less than	↓
10 seconds)
	The unit starts to operate.	The green indicator is on.
	↓ After approx. three seconds,
	The unit beeps three times
	and continues to operate.
RESET button	If the unit is not required to operate at this time, push [RESET] button
	once more or use the remote controller to turn it off.

• When the system is operating

Operation		Motions
Push [RESET] button for more than The unit is in operation.		The green indicator is on.
three seconds. (Less than	↓
10 seconds)
	The unit stops operating.	The green indicator is turned off.
	↓ After approx. three seconds,

The unit beeps three times.

If the unit is required to operate at this time, push [RESET] button once more or use the remote controller to turn it on.

RESET button

9-3-3. Power Failure During Timer Operation

When the unit is turned off because of power failure during timer operation, the timer operation is cancelled. In that case, set the timer operation again.

NOTE :

The Everyday Timer is reset while a command signal can be received from the remote controller even if it stopped due to a power failure.

9-4. FILTER Indicator

When the elapsed time reaches 1000 hours after air purifier operation, the FILTER indicator lights.

After cleaning the filters, turn off the FILTER indicator.

9-4-1. How to Turn Off FILTER Indicator

Push [RESET] button on the indoor unit.

NOTE :

If [RESET] button is pushed while the FILTER indicator is not lit, the indoor unit will start the automatic operation.

When you want a temporary operation while the FILTER indicator lights, push [RESET] button to turn off the FILTER indicator. (See page 48)

– 56 –