Toshiba RAS-B10EKVP-E, RAS-M13EKCVP-E, RAS-M18EACV-E, RAS-M14EACV-E, RAS-M16EKCVP-E, RAS-M18EAV-E 107

No.	Part name		Procedures		Remarks
&	Bearing	1)	Follow to the procedure in the items !.
		2)	Remove the two fixing screws used to secure
			the left edge panel of the heat exchanger, and	Screw
			remove the two screws used to secure the	Bearing
			bearing base.
				base
				Screw

3) Raise the left side of the heat exchanger	Raise the
slightly, and remove the bearing base.
	left side

<Caution at assembling>

•If the bearing is out from the housing, push it into the specified position and then incorporate it in

the main body.
• After assembling the bearing base, check that it	Remove in this direction
is fitted into the stepped part of the drain pipe.
	Bearing base
	Bearing

Drain pipe

Drain pipe

Bearing base

– 107 –