Toshiba RAS-M14EACV-E, RAS-M13EKCVP-E, RAS-M18EACV-E Cooling operation, Heating operation

Item	Operation flow and applicable data, etc.	Description
10. ECO	When pushing [ECO] button on the remote controller, a quiet
operation	and mild operation is performed by reducing the fan speed and
	the compressor speed.

<Cooling operation>					<Cooling operation>
This function operates the air conditioner with the difference					1) The room temperature (Tao) at
between the set and the room temperature as shown in the					the start time of DRY operation
following figure.					is detected.
The time correction is performed for 8 minutes each. (However,					2) According to difference between
the first correction is performed 150 seconds after start of the					the room temperature and the
operation.)					set temperature (Tsc), the
					operation starts with the condi-
					tions shown in the left figure.
					Set temp.
TA	Zone	Frequency	Fan	Time correction	(Tsc) = Set temp. on remote
	12	DRY max	L+ (W7)
[˚C]					controller (Ts) + (0.0 to 1.0)
	11	*12
+4.0					3) If the room temperature is down
	10	*11
+3.5
	9	*10		+ 1	by 2°C or more, turn off the
+3.0			L (W6)
	8	*9			compressor.
+2.5
	7	*8
+2.0
	6	COOL min
+1.5
	5		L– (W5)
+1.0
	4			± 0
+0.5
	3
TSC
	2
–0.5
	1
–1.0			UL (W4)	–1 zone: min 1

–2.0		0	OFF
		* 12 (DRY max - COOL min) /6 x 5 + COOL min
		* 11 (DRY max - COOL min) /6 x 4 + COOL min
		* 10 (DRY max - COOL min) /6 x 3 + COOL min
			* 9 (DRY max - COOL min) /6 x 2 + COOL min
			* 8 (DRY max - COOL min) /6 x 1 + COOL min
<Heating operation>						<Heating operation>
						1) The indoor fan speed is con-
						trolled within W7 as maximum
		30 minutes		→ Time	Compressor	value.
					speed	2) Setting the compressor speed to
	0				0Hz
		A				Max. αHz, the temperature zone
	–0.5
						in which the operation can be
	–1.0
						performed with Max. 16Hz is
temp.)	–1.5	B		A	16Hz
	–2.0				A zone	gradually widened after 30
Set–	–2.5					minutes passed when starting
	–4.0					ECO operation.
	–3.0
temp.	–5.0					3) The louver position is set
	–6.0					horizontally (Standard cooling
(Room	–7.0				16 to αHz	position) when the room tem-
	–9.0					perature comes close to the set
	–8.0	C		B	B zone
	–10.0					temperature or when 25 minutes
						passed after starting ECO
	–11.0
						operation.
				C	C zone
					αHz
			α	M14EAV-E	M18EAV-E
				60 Hz	50 Hz

– 47 –